12 - 72 Volt, 9.5 HP on 72 volts systems, 19.3 HP peak for 10 minutes
Voltage: 24 - 72 Volts
Inductivity: 0,019 mH
Current: 110 Amps
Resistance: 16 mOhm
Peak Efficiency:
2.2 KW @ 24 volts, 1080 RPM, 2.94 HP
3.5 KW @ 36 volts, 1700 RPM, 4.69 HP
4.74 KW @ 48 volts, 2300 RPM, 6.35 HP
5.97 KW @ 60 Volts, 2870 RPM, 8 HP
7.22 KW @ 72 Volts, 3480 RPM, 9.7 HP

Shaft: 3/4" Diameter, 3/16" Keyway
Protection: IP 20
Inertia of masse: 0.025 kgm²
torque: 20.5 Nm
Temporary service: 10 min = 200 Amps
Max torque: 38.5 Nm
Weight 11 Kg, 24.2 lbs

 

Non-Programmable

Specifications:
Operating Frequency: 18Khz
Throttle Input: 0-5K ohms, 5-0K ohms, 0-5 volts, and ITS (inductive throttle sensor)
Key Input Voltage: 8 volts to 1.5 times max battery volts
Quiescent Voltage: less than 75mA
Thermal Cutback: begins at 75C, 95C shutdown
Programming Interface: RS232 serial to host PC running freeware Windows interface

Current Limit: 300 amps
30 second rating: 300 amps
2 minute rating: 300 amps
5 minute rating: 200 amps
1 hour rating: 150 amps
Voltage drop @ 100 amps = <.10/<.20 volts

Weight: lb. 5.50

 

Potentiometer, Thumb-Actuated, 3-wire 0-5 k/ohm & 5-0 k/ohm, for bikes and scooters.
For 7/8" bars which fits most handlebar types, comes with molded plug for Currie systems.